$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.231.2 |
| Compatible Car | HONDA VAMOS HM1 2 3 4 HH5 6 DRIVER'S SEAT |
| Product Description | Model year: 1999-06-2018-05 Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ center hole). Seat offset is about 30mm toward the door (Recaro is closer to the door). The side of the seat cushion interferes with the center console at the front of the slide position. Notes / Interference information: For CS and CSE, the side of the seat cushion interferes slightly with the center console, and the seating position is higher due to the use of a spacer. For New Ortho, the side of the seat cushion interferes with the center console by about 5 to 10 mm. For SR-3, 4, 5, and new A-8, the side of the seat cushion interferes with the center console by about 5 to 10 mm, and the shoulder part interferes with the B-pillar by a few mm. For A-8 and SP-#N, the shoulder part interferes with the B-pillar by about 5 to 10 mm. For SP-# and Racer, an SP-G offset adapter set (product number 1600094J) is required. For Trend, Style, and Sport J, JJ, and JC, the seat cushion side interferes with the center console by a few mm. For RS/TS-# series, the offset of the handlebars can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (Please consult your dealer regarding interference with the console side (shift, etc.) when installing.) For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Left-hand armrest for right seat can be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, use the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS For TS-G / RS-G / TS-W / RS-W RS/TS-# series, please choose from two types of separately sold side adapter set or RS/TS-G offset adapter set. [Seating position priority] Side adapter set (product number 1700000J) [Offset priority] RS/TS-G offset adapter set (product number 1700001J) The handlebar offset can be adjusted to 5/10/15mm left and right offset. (The seating position is raised by +5mm.) SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Driver's seat frame (right seat). Only for 4 passengers. Vamos Hobby has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
