$221.30 SGD $227.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.841.1 |
| Compatible Car | HONDA CIVIC TYPE R FD2 |
| Product Description | YEAR MODEL: 2007-03-2010-08 Special notes The seating position is approximately 20mm lower than the lowest position of the original seat (when using ST-JJ). The seat offset is approximately 5mm on the door side (the Recaro moves closer to the door side). The forward sliding amount is approximately 20mm less than the original. Notes/Interference information The seating position is higher for CS and CSE due to the use of a spacer. SR-3, 4, 5: the backrest side and door armrest interfere by a few mm. SR-1, 2: the backrest side and door armrest interfere by a few mm, and the shoulder part and B-pillar interfere by a few mm. SP-#: the shoulder part and B-pillar interfere by a few mm. Trend-J, JJ, JC, D, DC: the backrest side and door armrest interfere by approximately 5 to 10 mm. Sport-J, JJ, JC, D, DC: the backrest side and door armrest interfere by a few mm. For RMS, please adjust to the optimal position using the separately sold RMS side adapter (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position New structure frame. One-position type. Special Note: The side airbag function built into the genuine seat will no longer be available. For vehicles equipped with side airbags, the airbag warning light must be turned off. If a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer illuminate. The seating position is 21mm higher when using the included adapter frame compared to the lowest position of the genuine seat height adjustment function. (When using New LX-F) (17mm lower when not using adapter frame). The handle offset is from the center of the handle, and the Recaro is about 4mm closer to the door (1mm closer to the door than the genuine seat). The amount of seat sliding is reduced by approximately 20mm compared to the original. Precautions/Interference information: The console and seat cushion will interfere at the forwardmost position of the seat slide. 1-3mm for Sportster, Cross Sportster, SR6/7/11. Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter and install it. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter and install it. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
