$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.871.1 |
| Compatible Car | HONDA INSIGHT ZE2 ZE3 |
| Product Description | Model year: 2009-01-2014-03 Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag function built into the factory seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position will be approximately 10mm lower than the lowest position of the factory seat (when using ST-JJ). The driver's seat only slides backwards by approximately 20mm less than the factory seat. Notes / Interference information: For SR1, 2, 3, 4, 5, 6, 7, 11, CSE, CT, and C-class seats, the side of the seat cushion and the center console interfere with each other by approximately 10mm near the frontmost position of the seat slide. For CS, CSE, CT, and C-class seats, the seating position will be higher by the amount of the spacer because a spacer is used. For RMS, please adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type. Armrest: Can be installed on the right hand side of the left seat, and on the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Only compatible with the driver's seat of vehicles without i-side airbags and vehicles with i-side airbags. Side airbag canceller included. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
