$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2086.005.2 |
| Compatible Car | SUBARU IMPREZA INCLUDING XV GK2.3.6.7 GT2.3.6.7 GTE |
| Product Description | Model year: 2016-10- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will require the airbag warning light to be turned off. The seating position is approximately 15mm higher when using the middle position of the Recaro's three-stage adjustment compared to the lowest position of the factory seat's height adjustment function. (Adjustable 13mm up and 13mm down). (When using the New LX-F). The Recaro seat's handle offset is 5mm closer to the door than the factory seat. The sliding position is 30mm shorter at the front and 10mm shorter at the rear compared to the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: At the frontmost seat slide position, AM19 (SPORT, STYLE, TREND), Orthoped, SR-6, 7, 11 and IS-05 series have a weak interference of about 3-7mm between the center console and the front end of the seat cushion. For RS/TS-# series, the normal side adapter (product number 1700000J) can be used, but if you are more concerned about the handlebar offset than the seat height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the old LX (including Ergomed series), there is interference with the console, so it is necessary to remove the recliner dial on the center console side and replace it with a rubber cap (product number 1600091J). Please remove the round recliner dial of the LS, etc. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. For Sport, G4 (vehicles with electric parking brake), XV (released in May 2017). Side airbag canceller included. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
