RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUBARU WRX S4 VBH DRIVER'S SEAT 2086.005.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2086.005.2

SUBARU WRX S4 VBH DRIVER'S SEAT

Model year: 2021-11-
Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags require the airbag warning light to be turned off. The seating position is approximately 5 mm lower when using the lowest position of Recaro's three-stage adjustment compared to the lowest position of the factory seat height adjustment function. (Adjustable 13 mm upwards, 26 mm upwards). (When using New LX-F). The Recaro seat's steering wheel offset is the same as the factory seat (10 mm closer to the door than the steering wheel center). The slide amount is reduced by 40 mm.
Notes / Interference information: For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Driver's seat frame (right seat). Side airbag canceller included.

Images are for illustration purpose only. Actual product may vary.