$441.90 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2086.006.1 |
| Compatible Car | SUBARU LEVORG VN5 PASSENGER SEAT |
| Product Description | Model year: 2020-10- Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position is almost the same as when the lowest position of the factory seat's height adjustment function is used with the Recaro's three-stage adjustment. (Adjustable 13mm upwards, 26mm upwards). (When using the New LX-F). The steering wheel offset of the Recaro seat is 5mm closer to the door than the factory seat (20mm closer to the door from the steering wheel center). The sliding position is 20mm shorter at the front and 20mm shorter at the rear than the factory. Notes / Interference information: When installed on a Sportster, the center console and the front end of the seat cushion will interfere with each other by about 5mm from the 4th notch from the front of the seat sliding position. For the RS/TS-# series, the normal side adapter (product number 1700000J) can be used, but if you are more concerned about the handlebar offset than the seating height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). For the RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. For the RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. Three height settings available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Cannot be installed Compatible seats: LX-F (IS-05 base) Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). In addition, any interference with the interior can be alleviated by adjustment. RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Passenger seat frame (left seat). Side airbag canceller included. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
