RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUBARU LEGACY BE9 5 E BH5 9 C E SP-G NO BUCKLE PRETENSIONER DRIVER'S SEAT 2086.523.2

$286.70 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2086.523.2
Compatible Car
SUBARU LEGACY BE9 5 E BH5 9 C E SP-G NO BUCKLE PRETENSIONER DRIVER'S SEAT
Product Description
Model year: 1998-12-2003-04
Special notes: The seating position will be lowered by approximately 55mm when installed for competition use. The seating position will be lowered by approximately 25mm when installed to comply with safety standards (using spacers). For vehicles equipped with side airbags, the airbag warning light must be turned off.
Cautions/Interference information: For D, DS, DSE, CS, and CSE, the center console side recliner cover must be removed. For CT and C-clutch, the center console side recliner cover must be removed, and there is approximately 5-10mm interference between the backrest side and the door armrest. For RS/TS-# series, the steering offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.)) For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One position type.
Armrest: Cannot be installed
Compatible seats: SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2
PRO RACER(RACER) SP-G/A
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. Vehicles without buckle pretensioners. Check to see if the driver's seat has a buckle pretensioner function. Frame exclusively for SP-G series (cannot be installed on SP-GN). Frame for driver's seat (right seat). Install using the dedicated side adapter included with the base frame. Side airbag canceller included.
Notes
Images are for illustration purpose only. Actual product may vary.