RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUBARU IMPREZA INCLUDING XV GDA GDB GD2 3 9 GGA GG2 3 9 WITH BUCKLE PRETENSIONER 2086.525.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2086.525.2

SUBARU IMPREZA INCLUDING XV GDA GDB GD2 3 9 GGA GG2 3 9 WITH BUCKLE PRETENSIONER

Model year: 2000-08-2007-05
Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). The seat offset is about 10mm toward the door (Recaro is closer to the door). The amount of sliding backwards is reduced by about 20mm compared to the genuine seat.
Notes / Interference information: For CS and CSE, the seating position is higher due to the removal of the center console side recliner cover and the use of a spacer. For CT and C-CLA, the backrest side and door armrest interfere by about 5 to 10mm, the center console side recliner cover is removed, and the seating position is higher due to the use of a spacer. For SR-3, 4, 5, the backrest side and door armrest interfere by a few mm, and the shoulder part and B-pillar interfere by about 10 to 20 mm. For SR-1 and 2, the backrest side and door armrest interfere by a few mm, and the shoulder part and B-pillar interfere by about 20 to 30 mm. For new A-8 and A-8, the shoulder part and B-pillar interfere by about 5 to 15 mm. For SP-# and Racer, the shoulder part and B-pillar interfere by about 5 to 15 mm, and an SP-G offset adapter set (product number 1600094J) is required. For Trend, Style, and Sport J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 5 to 10 mm. For SP-X, the shoulder part and B-pillar interfere by about 5 mm. For RS/TS-# series, the handle offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.). For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. Choose from 3 height settings (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CT Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle C-Classic Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle Pro Racer RMS RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter . Also, if there is interference with the interior, it can be reduced by adjustment. RCS RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles without side airbags and equipped with buckle pretensioners. Please check whether the driver's seat buckle pretensioner is functioning.

Images are for illustration purpose only. Actual product may vary.