RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA PIXIS JOY LA250A 2087.002.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2087.002.1

TOYOTA PIXIS JOY LA250A

Model year: 2016-08-
Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. Compared to the lowest position of the factory seat height adjustment function, the seat is approximately 7mm lower when using the center position of the Recaro's three-stage adjustment. (Can be adjusted up and down by 13mm by changing the position of the mounting hole) (When using New LX-F). The handle offset of the Recaro seat is almost the same as the factory seat. The forward sliding amount is reduced by approximately 20mm compared to the factory. If the Recaro seat is installed on the left seat only, it will strongly interfere with the factory bench seat.
Notes / Interference information: The seat strongly interferes with the factory bench seat, so the Recaro seat cannot be installed on the left seat only. For the AM19 series (TREND, SPORT), the seat backrest side and the door have weak interference (2-4mm). SP-# requires the SP-G offset adapter set . Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. It interferes strongly with the genuine bench seat, so you cannot install a Recaro seat on the passenger seat only. Side airbag canceller included. Compatibility with 4WD vehicles and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.