RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR SUZUKI SPACIA MK32S 42S 2088.001.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2088.001.1
Compatible Car
SUZUKI SPACIA MK32S 42S
Product Description
Model year: 2013-03-2017-12
Special notes: The side airbag built into the factory seat will no longer function. Vehicles with side airbags will need to have the airbag warning light turned off. If a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be on. The front seats will no longer function as a bench seat. The belt buckle is longer on the passenger seat than on the driver's seat, so the left and right heights are different. The seating position is the same as when the 3-stage adjustment is used in the middle position compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The steering wheel offset is the center of the steering wheel. The seat slide amount is reduced by about 20mm compared to the factory.
Notes / Interference information: For RS/TS-# series, an offset adapter set for RS/TS-G (product number 1700001J) is required. When installing TREND, STYLE, SPORT, SR-3, 4, 5 on the passenger seat, the seat backrest will interfere with the door trim by a few mm to about 9 mm (TREND). When installing TREND on the driver's seat, the seat backrest will interfere with the door trim by a few mm. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3 height options available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RCS side adapter before installation. *Please choose from the following two types.・RCS side adapter ・RCS stainless steel side adapter set AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set . *Normal side adapter (Product number 1700000J) cannot be used. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles, including Custom and Custom Z. Compatibility with vehicles equipped with options has not been confirmed. Side airbag canceller included.
Notes
Images are for illustration purpose only. Actual product may vary.