$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2088.002.1 |
| Compatible Car | SUZUKI ALTO HA36# 5MT |
| Product Description | Model year: 2014-12- Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. Compared to the lowest position of the factory seat height adjustment function, when the included adapter frame is attached and the pilot hole of the offset adapter for RS-G (sold separately) is used, the seat will be approximately 3 mm lower. When the adapter frame is not attached, the seat will be approximately 41 mm lower (when using RS-G). The Recaro seat's steering wheel offset is 15 mm closer to the console compared to the factory seat. The forward slide amount is reduced by approximately 20 mm compared to the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. Notes / Interference information: For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) is required. However, the steering wheel offset is 15 mm closer to the console compared to the factory seat when a 10 mm spacer is inserted on the door side. In addition, if the included 38mm adapter is not used and the RS/TS-G offset side adapter is used in the lower position, there will be no interference with the B-pillar, but if the upper position is used, there will be interference of about 1 to 5 mm. If the spacer is used and the lower position is used, there will be interference of about 1 to 5 mm near the rearmost part of the seat rail. For the RMS, adjust the RMS side adapter (sold separately) to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, adjust the RCS side adapter (sold separately) to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installing. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: Pro Racer RMS For the RMS, adjust the RMS side adapter (sold separately) to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. RCS RCS should be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 5MT vehicles. For the Alto Works, please refer to the matching information for the Alto Works. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
