RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR MAZDA CAROL HB37S 97S 2088.002.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2088.002.2

MAZDA CAROL HB37S 97S

Model year: 2022-01-
Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will require the airbag warning light to be turned off. Compared to the factory seat (measured on a vehicle without height adjusters), the seat will be approximately 17 mm lower when the adapter frame is installed. When the adapter frame is not installed, the seat will be approximately 55 mm lower (when using the New LX-F). The handle offset of the Recaro seat is almost the same as the factory seat (5 mm closer to the door). The slide amount is approximately 20 mm less than the factory seat.
Notes / Interference information: For RS/TS-# series, please install the RS/TS-G offset adapter set (product number 1700001J). For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One position type.
Armrest: Can be installed for the right hand on the left seat or the left hand on the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro Vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from the two types of side adapter set or RS/TS-G offset adapter set (sold separately). [Seating position priority] Side adapter set [Offset priority] RS/TS-G offset adapter set The handle offset can be adjusted to left/right offset 5/10/15mm. (The seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. When installing on the passenger seat, a Recaro seat equipped with SBR is required. Due to legal changes from September 2020, the passenger seat side is also required to be equipped with SBR (seat belt reminder).

Images are for illustration purpose only. Actual product may vary.