RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR SUZUKI SOLIO MA26S 36S 46S 2088.003.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2088.003.1

SUZUKI SOLIO MA26S 36S 46S

Model year: 2015-08-2020-11
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is 7mm higher when using the center position of the 3-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The steering wheel offset of the Recaro seat is approximately 10mm closer to the steering wheel center than the factory seat. The slide amount is 20mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. 3 height settings available (For some models, the slide rail legs may need to be cut depending on the installation position, so please perform a trial fit before installation.)
Armrest: Can be installed for the right hand on the left seat and the left hand on the right seat
Compatible seats: LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Solio/Solio Bandit. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.