$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2088.014.1 |
| Compatible Car | SUZUKI JIMNY SIERRA JB32W |
| Product Description | Model year: 1995-11-1997-12 Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ center hole). When installing the lowest seat position, the legs of the slide rail will interfere with the floor, so you will need to cut them. Cautions / Interference information: For LX (including Ergomed), LS, and LT, replace the recliner dial (triangle) on the center console with a thin recliner dial Position: New structure frame. 3 height options available (For some car models, the legs of the slide rail need to be cut depending on the installation position, so please do a trial fit before installation.) Armrest: Can be installed for the right hand on the left seat, or for the left hand on the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console side with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) and then install the rubber cap (sold separately). Seats with round recliner dials for LX and LS cannot be replaced with a thin dial (sold separately), so they cannot be installed in vehicles. Classic LX Pepita / Classic LX Spektrum For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately) after removing the recliner dial (triangle). The seats with round recliner dials for LX and LS cannot be replaced with the thin dial (sold separately), so they cannot be installed in the vehicle. LX-F (IS-05 base) LS / LS-# / LT-# For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately). The round recliner dial seats of the LX and LS cannot be replaced with the separately sold thin dial seats, so they cannot be installed in the vehicle. New Orthoped (with Recaro Vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
