$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.038.2 |
| Compatible Car | SUZUKI ALTO HA12 22 |
| Product Description | Model year: 1998-10-2000-11 Special notes: The seating position is almost the same as the OEM seat (ST-JJ center hole used). Cautions/Interference information: For LX (including Ergomed), LS, LT, Trend, Style, and Sport JS, the side of the backrest interferes with the door armrest by 5-10 mm. For SP-#N, the shoulder part interferes with the B-pillar by 5-10 mm. For New A-8 and A-8, the shoulder part interferes with the B-pillar by 5-10 mm. For MT cars, the shift lever interferes slightly with the side of the seat cushion, making it difficult to apply the handbrake. For SP-#, an SP-G offset adapter set (product number 1600094J) is required. For SR-1, 2, 3, 4, and 5, the shoulder part and B-pillar interfere by about 5 to 10 mm, and for MT vehicles, the shift lever and the side of the seat cushion interfere slightly, making it difficult to pull the handbrake, and the backrest side and door armrest interfere by about 20 to 30 mm. For Style-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 5 to 10 mm. For Sport-J, JJ, JC, D, and DC, the shoulder part and B-pillar interfere by about 5 to 10 mm, and the backrest side and door armrest interfere by about 20 to 30 mm. For New Ortho, the backrest side and door armrest interfere, making it difficult to pull the handbrake. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. 3 heights available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please do a trial fit before installation.) Armrest: Can be installed for the right hand of the left seat or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is sold separately. Please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10mm) and install it with the RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
