RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR SUZUKI KEI HN11 21 22S 2088.531.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2088.531.1
Compatible Car
SUZUKI KEI HN11 21 22S
Product Description
Model year: 1998-10-2009-08
Special notes: The seating position is approximately 10mm lower than the original seat (when using ST-JJ center hole). The steering wheel offset is approximately 10mm toward the center console (the Recaro moves closer to the center console). For manual transmission vehicles, the side of the seat cushion and the shift lever will interfere with each other at the front of the slide position. For models that use rubber caps, the B-pillar will interfere with the shift lever near the rear end of the slide position.
Notes / Interference information: For LX (including Ergomed series), LS, and LT, replace the recliner dial on the center console with a thin recliner dial (product number 1600090J), remove the recliner dial on the door side and replace it with a rubber cap (product number 1600091J). For the round recliner dial of the LX (including Ergomed series) and LS, the recliner dial on the center console will interfere, so remove the recliner dial on the door side. For SR-3, 4, and 5, replace the recliner dial on the center console side with a thin recliner dial (product number 1600090J), remove the recliner dial on the door side and replace it with a rubber cap (product number 1600091J), and there will be 15 to 20 mm of interference between the backrest side and the door armrest. For CS, a spacer is used, so the seating position will be higher by the amount of the spacer. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. 3 height settings available (For some car models, the legs of the slide rail need to be cut depending on the installation position, so please do a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console side with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) and then install the rubber cap (sold separately). Seats with round recliner dials for LX and LS cannot be replaced with a thin dial (sold separately), so they cannot be installed in vehicles. Classic LX Pepita / Classic LX Spektrum For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately) after removing the recliner dial (triangle). The seats with round recliner dials for LX and LS cannot be replaced with the thin dial (sold separately), so they cannot be installed in the vehicle. LX-F (IS-05 base)
LS / LS-# / LT-# For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately). The seats with round recliner dials for the LX and LS cannot be replaced with the separately sold thin dials, so they cannot be installed in the vehicle. CS / CR / CG / Conformed
New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS For the SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console side with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately) after removing the recliner dial (triangle). The seats with round recliner dials for the LX and LS cannot be replaced with the thin dial sold separately, so they cannot be installed in the vehicle. AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below.
Notes
Images are for illustration purpose only. Actual product may vary.