$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.537.2 |
| Compatible Car | SUZUKI MR WAGON MF22S |
| Product Description | Model year: 2006-01-2011-01 Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ center hole). The forward sliding distance is increased by about 20mm compared to the OEM. Notes / Interference information: The seating position is higher for CS and CSE because a spacer is used. For Trend-J, JJ, JC, D, and DC, the backrest side and door armrest interfere with each other by about 5 to 10mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, use the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. No side airbags. 2WD vehicles. Compatibility with vehicles equipped with optional items such as navigation units has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
