$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 30.033.2 |
| Compatible Car | ALFAROMEO ALFA ROMEO ALFA 155 167A2 |
| Product Description | Model year: 1992-10-1998-12 Special notes: The seating position will be raised by approximately 20 to 30 mm. For 95 model and later models equipped with seat belt tensioners, the seat belt buckle must be replaced (this must be provided at an Alfa Romeo dealer at additional cost. Part number for both sides is 112559780). Cautions / Interference information: Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: No installation examples, installation possibility unknown Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed C-Classic DS / DS-H / DS-V / ES-V/DSE New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
