RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA SUPRA A70 80.552.1

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
80.552.1
Compatible Car
TOYOTA SUPRA A70
Product Description
Model year: 1986-02-1993-05

Notes / Interference information: For LX (including Ergomed series), LS, LT, SR-1, 2, 3, 4, 5, remove the recliner dial on the center console and replace it with the rubber cap (dial removal is required depending on the position). For LX (including Ergomed series) and LS with a round recliner dial, remove the recliner dial on the center console (dial removal is required depending on the position). For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the RMS side adapter (sold separately).
Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Classic LX Pepita / Classic LX Spektrum Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). LS / LS-# / LT-# Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Pro Racer RMS RMS can be installed by adjusting the position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro Remove the recliner dial to avoid (mitigate) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Rally Special / First generation SR / Early SR-2 Remove the recliner dial to avoid (mitigate) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 Side adapter set (product number 1700000J) must be purchased separately. TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately.
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below.
Notes
Images are for illustration purpose only. Actual product may vary.