RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR ISUZU FASTER RODEO TFS RODEO 84.073.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

84.073.2

ISUZU FASTER RODEO TFS RODEO

Model year: 1988-06-1994-10

Notes / Interference information: Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjusting it.
Position: 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: No installation examples, installation possibility unknown
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase a side adapter set (product number 1700000J) separately. TS-G / RS-G / TS-W / RS-W You will need to purchase a side adapter set (product number 1700000J) separately.

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Rodeo

Images are for illustration purpose only. Actual product may vary.