$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 86.036.2 |
| Compatible Car | SUBARU VIVIO KK KW3 4 5-DOOR |
| Product Description | Model year: 1992-03-1998-09 Special notes: The amount of sliding backwards is reduced by about 20mm compared to the genuine product. Cautions / Interference information: For LX (including Ergomed series), LS, LT, SR-1, 2, 3, 4, 5, and new A-8, remove the door-side recliner dial and replace it with a rubber cap (product number 1600091J). For LX (including Ergomed series) and LS with a round recliner dial, remove the door-side recliner dial. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position, please perform a trial fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Classic LX Pepita / Classic LX Spektrum Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). LX-F (IS-05 base) LS / LS-# / LT-# Remove the recliner dial to avoid (reduce) interference with the vehicle, and then attach the rubber cap (sold separately). Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). Also, if there is interference with the interior, it can be reduced by adjustment. New Orthoped (with Recaro vent) RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS SR-S SR-C/ SR-7F |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 5-door |
| Notes | Images are for illustration purpose only. Actual product may vary. |
