SPOON FULL SPEC DAMPER KIT COILOVER SUSPENSION KIT FOR HONDA S660 JW5 S07A 51600-JW5-G20

SPOON

FULL SPEC DAMPER KIT COILOVER SUSPENSION KIT

51600-JW5-G20

HONDA S660 JW5

S07A

The ``3S suspension'' proposed by SPOON is:

○ The beginning area at the moment when the suspension sinks is made soft, resulting in a flat ride even when riding around town.
○ The intermediate range eliminates sliding resistance and makes it smooth, improving direct load transfer and straight-line stability.
○ By creating tough and strong damping characteristics near the bottom, it achieves high durability even in extreme areas such as high G cornering and riding on curbs.

However, in order to take advantage of this ideal suspension, it was first necessary to create the ideal body.
In the process of developing the S660, we first developed rigid parts such as the "STIFF PLATE series" and "Rigicolor" to make the entire body rigid, and then created the basis for full-scale development of the suspension. I did.
This is the balanced total setting that SPOON aims for.

In order to create a damper kit that is safe, fun, and fast at a high level for all stages such as city riding, winding roads, and circuits, we have designed and tested the settings based on a huge amount of data. We have completed the ideal car height adjustment kit.

A camber-adjustable pillow upper mount is installed on both the front and rear, making it possible to adjust the camber value according to the driving stage, and also dealing with tires that protrude beyond the fender line due to the installation of big calipers.
The pillow balls that enable a smooth and direct running feel are made by Minebea (NMB) and are highly durable.

We have installed helper springs on both the front and rear to ensure sufficient rebound stroke and achieve the ideal "spring feel".
A wide range of settings are possible, including low-down settings for circuits and street use. Notes & Special Notes
Specifications: 32 steps of damping adjustment, front and rear camber adjustable pillow upper, front and rear helper springs included


[Spring rate] Fr: 4kgf/mm (152mm ID65 ) ,Rr:4kgf/mm(203mm ID65)
[Helper] Fr:0.47kgf/mm Rr:0.47kgf/mm
[Vehicle height at time of shipment: Normal ratio] Fr:-15mm Rr:-15mm< br>[Vehicle height at time of shipment: Jack point] Fr: 130mm Rr:133mm
[Vehicle height at time of shipment: Fender] Fr:587mm Rr:620mm
[Vehicle height at time of shipment: Low beam height] 505mm<500mm


[Recommended vehicle height adjustment width: normal ratio] Fr: 0 to -35mm Rr: 0 to -35mm
[Dampening adjustment width] 32 steps (hard 1 step ⇔ soft 32 steps)
[Factory attenuation dial position] Fr: 20 steps Rr: 20 steps
[Factory camber value] Fr: -1.0° Rr: -2.0°
[Camber adjustable width] Fr: 0 ~ -3.0° Rr: 0 to -3.0° Note) Vehicle height is a value measured with our demo car.

Installation instructions
https://www.spoonsports.jp/blog/wp-content/uploads/2021/10/487930e715abaefc9bfd870137447e38.pdf

Compatible Models: DBA-JW5 6MT, DBA-JW5 CVT, 3BA-JW5 6MT, 3BA-JW5 CVT

CAN ONLY BE SHIPPED BY FEDEX OR UPS

Images are for illustration purpose only. Actual product may vary.